What's new
Photoshop Gurus Forum

Welcome to Photoshop Gurus forum. Register a free account today to become a member! It's completely free. Once signed in, you'll enjoy an ad-free experience and be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Printing photos


hershy314

Guru
Messages
1,616
Likes
769
I've been racking my brain as how to fix this problem. I'll take a photo and go to print it and it never turns out right. I'll always have an odd shaped boarder around the image, if I'm printing on 5x7 or 4x6 inch paper. If I print on a normal size paper it seems to work just fine. I want to have a uniform boarder around the image or else it looks horrible. Is there a way to fix this? I've tried printing from Photoshop and Lightroom with no luck. I've also tried from the picture view on my computer. Is there a printing program that would help or should I try cropping the image to the size i want (if possible). I really don't know what to do. Thanks for any help.
 
LR and PS can certainly do this, but you will have to do a bit of arithmetic to get things set up correctly.

Here's an example: Suppose you want to print on 5" x 7" paper and you want a half inch border all the way around the print. This means that the image itself has to be (5.0 - 0.5 - 0.5)" by (7.0 - 0.5 - 0.5)", or 4" x 6". If your image is any other size than 4x6, it will have to be modified to become 4x6.

If the image has the same aspect ratio, ie, 1 : 1.5, for example, if it's 2x3" or 8x12", the problem is simple: You just scale the image equally in both directions so that it becomes 4x6.

OTOH, if your image has a different aspect ratio from what is needed to print correctly, the procedure becomes a bit more involved. First, you have to realize that in 99% of the cases, you will not be able to simply scale the image differently in the horizontal and vertical directions to make it become 1 : 1.5. Such a simple approach usually only works if the original aspect ratio is within a percent or two of 1 : 1.5. If the difference is much larger, changes in the shapes of objects (especially people) usually become noticeable/objectionable.

In cases where the change in aspect ratio is larger, you will have to either reduce the excess in one direction or add some material in the other direction. This can be done by techniques such as cropping, stretching relatively unimportant edges of the image, or using a content-aware scaling tool.

This procedure isn't rocket science, but one has to think about what one is doing and do the necessary arithmetic to see exactly what needs to be done before you attempt to make changes.

HTH,

Tom M
 

Back
Top