What's new

Logo for my product design shop


IamSam

Administrator
Staff member
Administrator
Messages
17,881
Likes
11,366
Nice. It has some symmetry issues with the semi circles that throw off the eye slightly, but all in all a solid design.

Screen Shot 2020-06-12 at 7.58.30 PM.png

Also some odd lines, missing corner, and leftovers
Screen Shot 2020-06-12 at 7.45.33 PM.png
Screen Shot 2020-06-12 at 7.45.42 PM.png
Screen Shot 2020-06-12 at 7.45.49 PM.png
Screen Shot 2020-06-12 at 7.45.55 PM.png
 

polarwoc

Guru
Messages
1,135
Likes
902
I was going to point out the remnant lines and ask if it was part of the design or were overlooked, but Sam already pointed them out.
1.png
If width of the triangle side depicted by Green line is 1 inch, the Red line seems 1.2 inch. That is to say the sides of the triangle are not with similar width - is that intentional?

Otherwise, the design is excellent.
 

[ iLLuSioN ]

Member
Messages
10
Likes
19
Your logo doesn't currently work in postage size, e.g. for promotional gifts on USB sticks, pens, etc.

The lines are a bit too thin and "PRODUCT DESIGN" too small
 

pauloalex_98

Well-Known Member
Messages
172
Likes
66
finished.jpg

I already finished the missing lines and the geometry problem in the right down corner of the upper triangle, I'm gonna try to work on the inches of the lines later but I don't think it's necessary, it looks good either way
 

IamSam

Administrator
Staff member
Administrator
Messages
17,881
Likes
11,366
I'm gonna try to work on the inches of the lines later but I don't think it's necessary, it looks good either way
Well................actually it is necessary and it does matter. How it looks, or better yet the accuracy of your lines is a direct reflection of your skill set. Your logo is a representation of your company and what it can do. Anyone viewing the logo could notice it's off and quickly form a negative opinion. You can obtain accuracy with ease using shape tools.

Screen Shot 2020-06-13 at 8.47.19 AM.png
 

polarwoc

Guru
Messages
1,135
Likes
902
...I'm gonna try to work on the inches of the lines later but I don't think it's necessary, it looks good either way
That sounded like a compromise. Please do not do that if you are yourself dissatisfied. That will keep bothering you each time you see the logo or when someone comments on it later. On the other hand, if the sides of different thickness on the geometric shapes is intentional and all stakeholders are happy, you could go ahead.
 

pauloalex_98

Well-Known Member
Messages
172
Likes
66
Your logo doesn't currently work in postage size, e.g. for promotional gifts on USB sticks, pens, etc.

The lines are a bit too thin and "PRODUCT DESIGN" too small
The logo isn't meant for that. It's for a product design shop where I sell my designs, I just need the logo to represent my shop. I'm not gonna print the logo anywhere.
 

Top