Reply to thread

tranquil - it will only scale if you set the setting I was talking about, otherwise it will just cut off the parts that go outside the printable area. Also, I don't remember about other brands, but with an Epson printer, there are two settings for the margins. If you just set to zero like you're saying, it will set it to the default margins. You have to set the printing method to "maximum" to force it to go to the smaller margin size. On most Epson printers this is .12 inches on each side, which is pretty darned close to full bleed. If you want true full bleed, you would have to do what you were saying about cutting it down or go with something like a dyesub printer, which is going to run a minimum of a few hundred bucks.