Reply to thread

Pakmn, what I did in this example was

a) give the type a "slight" bottom curve using the "create warp text" tool.

b) rotate it ever so slightly

b) then played with the "skew" a bit

c) then adjusted the horizontal/vertical a just a bit in the "create warp text" tool.

It takes a little experimentation, but in the end, the type is still editable.

If you have "type" filling the whole post-it note, only the type at the bottom of the note would be "slightly" distorted to match the curve of the paper.

As for the other part of your question, I don't have version 6 so I will let someone else help you there.